Latch Up 1 Port RJ45 Magnetic Ethernet Jack Shielded EMI Finger 0.2mm Thickness
1. Magnetic RJ45 Connector ( JRCA1S844 ) Attributes:
| Brand | GLGNET |
| Part Number | JRCA1S844 |
| Application-Lan | ETHERNET without POE |
| AutomDX | YES |
| Bst Circuit | YES |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u"/50u" |
| Diodes | NO DIODES |
| LED Option | Without LED |
| Shielding | Shielded, EMI Finger |
| Mounting Type | Through Hole |
| Orientation | 90° Angle |
| Latch | Up |
| Number of Ports | 1X1 |
| PCB | FR4 |
| PCB Mount Angle | Side ENTRY |
| PCB Retaining Post | T POST |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | Without |
| Speed | 1000 Base - T |
| Temperature | 0 to 70 ℃ or -40 to 85 ℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
2. Electrical Specification:
| Parameter | Specification |
| Brand | GLGNET |
| Operating Temperature | 0 to 70 ℃ |
| Turns Ratio | 1:1±2% |
| Open Circuit Inductance (ocl) | 350Uh MIN@ 100KHz/100mV with 8mA DC Bias |
| Insertion Loss (IL) | -1.0dB MAX @ 0.3MHz – 100MHZ; |
| Return Loss (RL) Z out = 100 OHM | -18dB MIN @ 1MHz – 30MHZ; -13dB MIN @ 30MHz – 60MHZ; -10dB MIN @ 60MHz – 100MHZ; |
| Crosstalk Adjacent Channels | -30dB MIN @ 1MHz – 100MHZ |
| Common Mode Rejection Ratio (CMRR) | -30dB MIN @ 1MHz – 100MHZ |
| DC current/voltage rating – pse pins | 0.1A MAXIMUM @ 48 VDC ( continuous) |
| HI - POT | 2250 VDC @ 60 Seconds |
3. Features
- Complies with requirements of IEEE 802.3u standards
- RJ45 connector is with 1000 Base - T magnetic
- Comply with RoHS, REACH, UL requirements
- Design for 1000 Base - T transmission over UTP-CAT5 cable
- Broad set of configurations
- -40°C to +85°C or 0°C to +70°C operating temperature range
- Combinations of green, yellow, orange, and red LEDs
- With or without POE Function
- 90 ° Orentation
4. Customization Services
- LED color can be green, yellow, orange, red and so on;
- Operating Temp. Can be 0 ~ 70 ℃ or -40 ~ 85 ℃ ;
- Contact Finish can be with 6u", 15u", 30u", 50u" gold plating;
- Supports to custom different structure, Tab - up or Tab - Down;
- Supports to custom different Pin Length;
- With or without POE function;
- 90 ° or 180 ° Orientation
- Being with or without LED diode,
- Being with or without EMT TAB ( EMI Spring , EMI Finger );
- Being with or without lightpipes;
- Printing LOGO
5. Materials
- Housing: Class Filled PA46 (Black) UL94V-0 (ROHS)
- RJ CONTACT / PLASTIC : Filled PA46 (Black) UL94V-0 (ROHS)
- Shield: 0.2mm Thickness With Brass
- Jack Cavity Conforms to FCC rules and regulations part 68 subpart F
- The Part is recommended for wave soldering process peak soldering temperature is 260 ℃ MAX. 10 Seconds Max;
- Operating Temperature: 0 ℃ to +70 ℃, Storage Temperature : -40 to 85 ℃
6. Applications:
- LED TV
- SMart TV
- STB
- PCs
- Router,
- Splitter
- Switcher
- Internet of Things (Ethernet)
- IP cameras, surveillance, and phones
- Access points
- Network interface cards (NIC)
- Industrial process control
- Networking and communications
- Broadcast video
- Storage
- Set-top boxes and video
- Power over Ethernet (PoE)
- Test and measurement
- Multifunction printers (MFP)
7. GLGNET Advantages:
- Our products are compliant with RoHS, REACH and UL certification
- Long term Corporation with HUAWEI, ZTE, FOXCONN, XIAOMI, TCL and so on
- 20KK Prots / Month Capacity
- ISO9001, ISO14001, QC080000, OHSAS18001, and IECC international management system certification
- 20 years experiences in Magnetic RJ45 Connectors
- 1500 Employees
- 58 R&D Engineers.
- 22000 square meters Factory
8. Mechnical Drawing
