1 X 1 Single Port Magnetic RJ45 Connector Copper Alloy Preplated With Nickel
1. Materials:
- Housing: Class Filled PA46 ( Black) UL94V-0 (ROHS)
- Jack Cavity Conforms to FCC rules and regulations part 68 subpart F
- The Part is recommended for wave soldering process peak soldering temperature is 260 ℃ MAX. 10 Seconds Max;
- Operating Temperature: 0 ℃ to +70 ℃ or -40 ℃ to 85 ℃ , Storage Temperature : -40 ℃ to +85 ℃
- Shielding Shell : 0.2mm Thickness with Brass
- Contact: Phosphor Bronze, 50-100 Microinches Min, Overall Ductile Nickel Underplate with selected 6 Microinches At Mating Interface;
2. Electrical Specification
| Parameter | Specification |
| Brand | GLGNET |
| Operating Temperature | 0℃ to 70 ℃ |
| Turns Ratio | 1:1±2% |
Open Circuit
Inductance (ocl) | 350uH MIN@ 100KHz/100mV with 8Ma DC Bias |
| Insertion Loss (IL) | -1.0dB MAX @ 0.3MHz – 100MHZ; |
Return Loss (RL)
Z out = 100 OHM | -18dB MIN @ 1MHz – 30MHZ;
-13dB MIN @ 30MHz – 60MHZ;
-10dB MIN @ 60MHz – 100MHZ; |
Crosstalk
Adjacent Channels | -30dB MIN @ 1MHz – 100MHZ |
| Common Mode Rejection Ratio (CMRR) | -30dB MIN @ 1MHz – 100MHZ |
| HI - POT | 2250 VDC @ 60 Seconds |
3. Features
- Complies with requirements of IEEE 802.3u IEEE 802.3ab standards
- RJ45 connector with 10 / 100 / 1000 BASE-TX magnetic, or 2.5G / 5G / 10G Transformer
- Comply with RoHS requirements
- Design for 10 / 100 / 1000 / 2.5G / 5G / 10G BASE transmission over UTP-5 / UTP-6 cable
- Broad set of configurations
- Supports 10/100Base-T, 1000Base-T, 2.5GBase-T, 5GBase-T or 10G Base - T
- Compatible with surface-mount with paste-in-hole (PIH) technology
- -40°C to +85°C or 0°C to +70°C operating temperature range
- Supports PoE and PoE+ (10/100Base-T)
- Combinations of green, yellow, orange, and red LEDs
4. Product Attributes
| Applications | 10 / 100 Base - T |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | 6u", 15u", 30u", 50u" Gold Plating |
| Cores per Port | 8 |
| Diodes | Can be with or without Without DIODES |
| LED Option | Can be with or Without LED |
| Shielding | Shielding Shell |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Latch | Up |
| Number of Ports | 1 X 1 Single Port |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | WITH |
| Speed | 10 / 100 BASE-T |
| Operating Temperature | 0 TO 70 ℃ or -40 TO 85 ℃ |
| Storage Temperature | -40 TO 85℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
5. GLGNET Customization:
- Supports to custom different structure, Tab - up or Tab - Down;
- Supports to custom different Pin Length;
- Being with or without LED diode,
- Being with or without EMT TAB ( EMI Spring , EMI Finger );
- Being with or without lightpipes;
- LED color can be green, yellow, orange, red and so on;
- Operating Temp. Can be 0 ~ 70 ℃ or -45 ~ 80 ℃ ;
- Contact Finish can be with 6u", 15u", 30u", 50u" gold plating;
6. Applications:
- Broadcast video
- Set-top boxes and video
- Power over Ethernet (PoE)
- Test and measurement
- Multifunction printers (MFP)
- IP cameras, surveillance, and phones
- Access points
- Network interface cards (NIC)
- Industrial process control
- Networking and communications
7. Advantages:
- Our products are compliant with RoHS, REACH and UL certification
- Long term Corporation with HUAWEI, ZTE, FOXCONN, XIAOMI, TCL and so on
- 20KK Prots / Month Capacity
- ISO9001, ISO14001, QC080000, OHSAS18001, and IECC international management system certification
- 20 years experiences in Magnetic RJ45 Connectors
- 1500 Employees
- 58 R&D Engineers.
- 22000 square meters Factory
8. Mechnical Drawing
